How to Create a Second Copy of Hp Recovery Media Again

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP PCs - Creating a Recovery Image on Discs or Saving a Recovery Image to a USB Flash Drive (Windows 8)

This document pertains to HP and Compaq computers that came with Windows viii.

This document describes how to save a recovery paradigm on media that you lot tin can apply to restore your computer to its original status in case of a major trouble with your computer.

HP strongly recommends that you create a recovery image on discs or save a recovery image to a USB flash drive as shortly as you receive your computer. If your HP computer with Windows 8 does not have the HP recovery program, or if the recovery disc set up or USB drive was not created before the recovery partition was damaged or erased, you need to discover a gear up of the HP recovery discs that match your model number from the Internet or install a new operating organisation.

HP recovery software allows you to make but one recovery backup. These backup files comprise the original operating system, drivers, and application software that shipped with the computer.

This video shows how to create a recovery image on discs in Windows 8

Media options: discs or a USB flash bulldoze

Your figurer has 2 options for saving a recovery image on media: DVD discs or a USB flash drive. Employ the option that is virtually convenient for yous.

Creating a recovery epitome on media for your HP notebook calculator

HP recovery software allows you to make but one recovery backup. These fill-in files contain the original operating organization, drivers, and application software that shipped with the figurer.

Depending on the type of media you lot selected, use one of the following sections to save a recovery image on media.

Creating a recovery prototype on discs

Recovery Media Creation software saves a recovery image to a fix of discs using blank, writable DVDs (DVD-R, DVD-R DL, DVD+R, or DVD+R DL). HP recommends using bare DVD+R discs. Use a proper noun-brand label from a manufacturer you trust, as these recovery DVDs are very of import.

Before you offset

• You need at to the lowest degree iv blank DVD+R discs. The Recovery Media Creation software program states how many discs are needed at the beginning of the process.

  notation:

  But DVD-R, DVD-R DL, DVD+R, or DVD+R DL discs are uniform with the Recovery Media Creation program. The post-obit disc types are not compatible with the Recovery Media Creation program:

  • CDs

  • DVD-RW

  • DVD+RW

  • DVD-RW DL

  • DVD+RW DL

• The Recovery Media Cosmos software program allows you lot to save but one consummate recovery image on a set of discs or a USB flash bulldoze.

• The Recovery Media Cosmos software program requires an uncorrupted recovery partition (Recovery Image (D:)) to create the recovery paradigm. Uncorrupted ways the recovery partition has not been modified or removed.

• The recovery prototype creation process takes well-nigh 30 minutes per DVD. The entire recovery set does non need to be created in one session.

• The Recovery Media Creation software can be aborted at whatever fourth dimension, except during the writing (burning) process, by clicking Cancel. The next time the Recovery Media Creation software program is run, it automatically starts where it last stopped.

• You lot can apply the recovery discs on another computer but if the 2d computer is the same model as the one that was used to relieve the original recovery image on the recovery discs.

Follow these steps to create a recovery image on a disc set.

annotation:

Your estimator screens might vary slightly from the screens shown below.

1. Disconnect from the Internet and close all other programs. Creating a recovery image on discs is a resource-intensive process. You should not apply your computer for other work while the computer is creating the recovery image on discs.

2. From the Start screen, type recovery manager to open the Search charm, and and then select HP Recovery Manager from the search results.

   Figure : Searching for recovery manager

   

3. Under I'd similar to accept safety measures, click Recovery Media Creation.

   Figure : Recovery Media Creation

   

   note:

   If Recovery Director sends the following bulletin, a recovery image has already been created. Due to license restrictions, merely one recovery image tin be created. If the kickoff recovery disc set is incomplete or damaged and this message opens, utilize another method to obtain new discs.

   Figure : Recovery media already created message

   

4. In the warning screen that appears, click I Accept, and so click Continue.

   Figure : Recovery media cosmos warning

   

5. If you are prompted for an Administrator countersign or confirmation, type the password or provide confirmation. If a User Account Control window asks if you desire to allow the program to brand changes to the calculator, click Yes.

   The computer prompts you lot to insert a DVD or USB flash drive and displays the number of discs you need.

6. Obtain the same number of bare DVDs as shown in the window and characterization them, according to their disc number, using a permanent mark.

   For case, if your recovery requires 7 discs, mark the first disc 1 of 7 and the second two of 7, and then on.

7. Click DVD or DVDDL, insert the DVD or DVDDL, then click Yes.

   Effigy : Insert discs

   

8. Insert disc 1 of 7. The estimator prepares the data to write to the disc, burns the data to the disc, and then verifies the disc.

   caution:

   Cancelling the write process in the centre might result in a corrupted and unusable disc. Earlier cancelling, expect until the disc has completed its write and verification process and prompts for the adjacent disc.

   Figure : Preparing data to burn to disc

   

   Figure : Burning data to the disc

   

   Figure : Verifying the disc

   

9. The computer prompts you to remove and label the outset disc. Click OK, and so insert the side by side disc.

10. Echo steps viii and 9 for each disc. The estimator prepares, burns, and verifies each disc until the burning process is complete. Click OK.

    Effigy : Recovery image on discs created successfully

    

11. Click Terminate to close the recovery disc creation plan.

12. Be certain all discs are marked appropriately, and store them in a safe place.

    circumspection:

    It is of import to protect the discs you created. Store these discs in a safe, dark place, abroad from sunlight.

    If you attempt to create another recovery image on other media after successfully creating one ready of discs, a screen displays stating but i recovery set is allowed. Your simply selection is to click OK and exit the program. If the start recovery disc set is incomplete or damaged and this message opens, apply some other method to obtain new recovery media.

Saving a recovery image to a USB flash drive

Follow these steps to save a recovery image to a USB flash drive.

Before you showtime

• Use a blank, loftier-quality USB flash bulldoze no greater than 32GB and displays as an external device in Windows.

• The recovery prototype creation software allows merely one recovery image to be created. If you created a recovery epitome on other media, you can non create a recovery prototype on a USB drive.

• The recovery image cosmos software requires an uncorrupted recovery segmentation (FACTORY_IMAGE D:). Uncorrupted means that the recovery partition has not been modified or removed.

• The recovery image creation process takes nearly 30 minutes.

annotation:

Your estimator screens might vary slightly from the screens shown beneath.

1. Disconnect from the Internet and close all other programs. Creating a recovery image on media is a resources-intensive procedure. Y'all should non use your estimator for other work while the computer is saving the recovery image.

2. From the Start screen, type recovery director to open the Search charm, and then select HP Recovery Manager from the search results.

   Figure : Recovery managing director search

   

3. Under I'd like to accept safe measures, click Recovery Media Cosmos.

   Effigy : Recovery Media Creation

   

   notation:

   If Recovery Managing director sends the post-obit message, a recovery image has already been created. Due to license restrictions, merely one recovery paradigm can be created. If the offset recovery media set is incomplete or damaged and this message opens, use another method to obtain a new recovery image.

   Figure : Recovery media already created message

   

4. In the alarm screen that appears, click I Accept, and then click Continue.

   Figure : Recovery media creation warning

   

5. If you are prompted for an Administrator countersign or confirmation, type the password or provide confirmation. If a User Business relationship Control window asks if y'all want to allow the programme to make changes to the computer, click Yes.

6. The computer prompts you lot to insert a DVD or USB flash drive. Insert the USB flash bulldoze into an unused USB port, and then click Yeah.

   Figure : Insert USB

   

   note:

   If the USB flash bulldoze does not appear in the list, make sure to utilise a bulldoze that appears in Windows as external storage media.

7. Follow the on-screen instructions to relieve the recovery image to the USB flash drive.

8. Click Stop to close the recovery image creation program.

9. Store the USB flash drive in a safe, protected place.

   If you attempt to save some other recovery image on other media afterwards successfully saving one recovery image, a screen displays stating that simply 1 recovery set is allowed. The only selection is to click OK and exit the programme.

Creating a recovery image on media for your HP desktop figurer

HP recovery software allows y'all to brand only one recovery backup. These backup files contain the original operating system, drivers, and application software that shipped with the estimator.

Depending on the type of media yous selected, use ane of the following sections to create recovery media.

Creating a recovery image on discs

Recovery Media Cosmos software saves a recovery prototype to a prepare of discs using bare, writable DVDs (DVD-R, DVD-R DL, DVD+R, or DVD+R DL). HP recommends using blank DVD+R discs. Use a name-make label from a manufacturer you trust, as these recovery DVDs are very important.

Before you start

• Yous need at to the lowest degree 4 bare DVD+R discs. The Recovery Media Cosmos software program states how many discs are needed at the outset of the process.

  annotation:

  But DVD-R, DVD-R DL, DVD+R, or DVD+R DL discs are compatible with the Recovery Media Creation program. The post-obit disc types are non compatible with the Recovery Media Creation program:

  • CDs

  • DVD-RW

  • DVD+RW

  • DVD-RW DL

  • DVD+RW DL

• The Recovery Media Creation software program allows you to relieve only one complete recovery prototype on a set of discs or a USB wink drive.

• The Recovery Media Creation software plan requires an uncorrupted recovery partition (Recovery Image (D:)) to create the recovery prototype. Uncorrupted means the recovery partition has not been modified or removed.

• The recovery image creation process takes well-nigh 30 minutes per DVD. The entire recovery set does not need to be created in one session.

• The Recovery Media Creation software can be aborted at whatsoever fourth dimension, except during the writing (called-for) procedure, by clicking Cancel. The next time the Recovery Media Creation software programme is run, it automatically starts where information technology final stopped.

• You can use the recovery discs on another estimator but if the 2nd computer is the same model as the i that was used to save the original recovery paradigm on the recovery discs.

note:

Utilise DVD+R discs if your disc bulldoze supports the DVD+R format. CDs and DVD-RW/DVD-RW discs are not uniform with the Recovery Media Creation program.

notation:

If bulldoze encryption software is running while creating a recovery epitome on discs, file verification errors can occur. If you are using drive encryption software, such as bitlocker, disable bulldoze encryption before saving the recovery image on your discs.

notation:

Your computer screens might vary slightly from the screens shown below.

Follow these steps to create a recovery image on a disc set.

1. Disconnect from the Cyberspace and close all other programs. Creating a recovery paradigm on discs is a resources-intensive process. You should not apply your reckoner for other work while the computer is creating a recovery image on discs.

2. From the Outset screen, type recovery managing director to open the Search charm, and so select HP Recovery Managing director from the search results.

   Figure : Recovery manager search

   

3. Under I'd like to take precautions, click Recovery Media Creation.

   Effigy : Recovery Managing director: Recovery Media selection

   

   note:

   If Recovery Manager sends the following message, a recovery image has already been created. Due to license restrictions, merely one set of recovery media can exist created. If the first recovery disc set up is incomplete or damaged and this bulletin opens, use another method to obtain new discs.

   Figure : Recovery media already created message

   

4. If you are prompted for an Ambassador password or confirmation, type the password or provide confirmation. If a User Account Control window asks if you want to allow the program to brand changes to the computer, click Yes.

5. In the Recovery Media Creation window, select Create recovery media using blank DVD(s), and and then click Next to continue.

   Figure : Recovery Media Creation welcome screen

   

6. The Recovery Media Creation window lists the number of discs needed to create your recovery epitome on a set of discs.

   Figure : Number of Discs Required

   

   Obtain the aforementioned number of bare DVDs as shown in the window and label them, co-ordinate to their disc number, using a permanent marker.

   For example, if your recovery requires 5 discs, marker the starting time disc 1 of five and the second 2 of 5, and then on.

7. Insert the first blank DVD, then click Next to continue.

   Figure : Recovery Media Creation: Number of discs needed

   

8. A verification window opens, showing the disc type and the number of discs needed. Click Side by side.

   Figure : Type of disc inserted

   

9. The Recovery Media Creation window opens and displays the status of the following processes.

   • Collecting files - The program collects needed files from the recovery partition.

   • Writing files - The program burns the first disc.

   • Verifying disc - The plan verifies the contents of each disc.

     Figure : Recovery Media Creation status screen

     

     circumspection:

     Canceling the write procedure in the middle might event in a corrupted and unusable disc. Before canceling, await until the disc has completed its write and verification process and prompts for the adjacent disc.

   note:

   If the recovery image creation process cancels automatically while collecting files, temporarily disable Windows User Business relationship Control. To disable, see User Account Control (Windows seven).

10. Wait for a message stating that disc cosmos was successful.

    When the disc is created, the disc is automatically ejected.

    Figure : Recovery Media Creation: Disc creation successful

    

11. When prompted for another disc, insert the disc into the disc tray or slot.

    The same process begins for Disc ii and subsequent discs, if they are required. With the successful called-for of each disc, a Disc creation successful message displays and the disc is automatically ejected, assuasive you to retrieve the disc.

12. Go on saving the recovery image to discs until Recovery Media Cosmos has successfully created all recovery discs, then click Adjacent.

13. Recovery Managing director displays a message indicating the programme was successful. Click Finish.

    Effigy : Recovery disc creation complete

    

Resolving disc verification failures

If the figurer ejects a disc and a disc verification fault message displays, the disc burn on that disc was unsuccessful. Do not exit from the system recovery disc process. Instead, insert another disc to complete the disc creation process. If the error occurs once more, apply a different brand of writable disc.

Creating a recovery prototype on a USB wink drive

Instead of using discs, you lot can create a recovery image on certain blank USB storage devices. This section describes how to save a recovery prototype to a USB wink drive.

Earlier you kickoff

The following is a list of features and important information.

• Use a bare, high-quality USB flash bulldoze no greater than 32GB and i that is not branded as Windows 8 compatible.

• The recovery paradigm cosmos software allows only one recovery image to be created. If you lot created a recovery image on other media, you can not create a recovery epitome on a USB bulldoze.

• The recovery epitome creation software requires an uncorrupted recovery partition (FACTORY_IMAGE D:). Uncorrupted means that the recovery sectionalisation has not been modified or removed.

• The paradigm creation process takes about 30 minutes.

note:

If drive encryption software is running while creating this media, file verification errors can occur. If yous are using drive encryption software, such every bit bitlocker, disable drive encryption before saving the recovery image on the media.

Apply the following steps to create a recovery image on a USB flash drive.

1. Disconnect from the Cyberspace and close all other software.

2. From the Start screen, type recovery manager to open the Search charm, and so select HP Recovery Manager from the search results.

   Figure : Recovery manager search

   

3. Under I'd like to have precautions, click Recovery Media Creation.

   Figure : Recovery Manager: Recovery Media selection

   

   notation:

   If Recovery Director sends the post-obit message, a recovery epitome has already been created. Due to license restrictions, only one set of recovery media can be created. If the first recovery disc set up is incomplete or damaged and this message opens, employ another method to obtain a new recovery image.

   Figure : Recovery media already created message

   

4. If you are prompted for an Administrator countersign or confirmation, type the password or provide confirmation. If a User Business relationship Control window asks if you lot want to allow the programme to make changes to the computer, click Yeah.

5. Select Create recovery media with a USB flash bulldoze, and then click Next to continue.

   Figure : Recovery Media Creation welcome screen

   

6. To indicate where the recovery image is to exist saved, insert a USB flash bulldoze into one of the USB ports on the computer.

   annotation:

   If the USB wink bulldoze does not appear in the list, make certain to employ a drive that appears in Windows as external storage media.

   Figure : Insert a USB wink bulldoze

   

7. A verification window opens, showing the locations for removable disks. Select the location for your USB drive, so click Next.

   Effigy : USB flash drive location

   

8. A Recovery Manager message opens stating that the flash drive will exist formatted. Click OK to format the USB flash bulldoze and go on.

   annotation:

   Formatting this flash drive deletes any files on the drive.

   Figure : Verification message

   

9. Await while the software creates your recovery image on the USB wink drive.

   Recovery image cosmos happens in ii stages:

   Offset, the software copies the files to the USB wink drive.

   Second, the software verifies that the files were copied successfully. A screen displays for each process.

10. Click Finish when Recovery Managing director has successfully created the recovery image on the USB flash drive.

    Figure : Recovery disc creation consummate

    

11. Store the USB wink drive in a condom, protected place.

    If you lot attempt to salvage another recovery image on other media after successfully saving one recovery image, a screen displays stating that but one recovery prepare is allowed. The only choice is to click OK and exit the programme.

Frequently asked questions virtually creating a recovery image on media

Why exercise I get the message, "Recovery disc has been created"?

But one HP recovery image tin can be created and Recovery Director detects a previously successful session.

Due to licensing restrictions, yous tin can create only one HP recovery image from your computer. This message appears when a recovery image has already been created on media. If yous purchased a previously used computer or a computer from a store but the computer box was already opened, so a recovery image on media was probably created before you purchased the figurer and this bulletin is normal. If the computer is less than a few years old, then HP tin commonly provide a recovery image. At that place might be a charge depending on the warranty condition of the computer, the Country/Region where the calculator was purchased, and the condition that is causing the bulletin. For more data, see Looking for HP Recovery Discs or an HP USB Recovery Bulldoze?

I get an error when creating a recovery image on discs, what tin can I do?

Create the recovery image on discs from Windows safe style using a unlike make of disc.

Disc compatibility or other software is likely interfering. Safe way prevents non-essential services and software from opening when Windows loads. Open Recovery Manager while in Windows prophylactic style to create your discs. For more than information near Windows safe mode, see Windows 8 Safe Style. If bug persist, use new discs of a different, loftier-quality brand that you trust. HP recommends using the DVD+R format with your drive.

When I effort to create a recovery image on a USB wink bulldoze, it does not detect my USB storage device. Why?

The USB Device should exist less than 32GB and NOT a Windows eight uniform USB flash bulldoze.

The HP recovery manager software is not uniform with many USB storage devices larger than 32GB. HP Recovery Managing director displays the total size of the source files when going through the recovery image creation process. You can stop at this screen during the creation process to know what size of storage device you should use. Use a storage device that is larger than the size of the source files, just non larger than 32GB.

Too, some USB storage devices may not appear to Windows as an external storage device. Before creating the recovery media, plug the USB wink bulldoze into an open up USB port and look in the Computer section of File Explorer to see if it appears in the removeable storage section.

Figure : Windows 8 Compatible logo on USB device production packaging - do not utilize

When I create a Recovery epitome on media, does it salve software I installed... similar Office?

No, but you can save all software to a system image using Windows 8.

HP recovery restores the software prototype to its original status. Any software that was installed later is removed when you lot perform an HP recovery.

If you desire to relieve all the software on your computer at any given indicate in time, utilize Windows 8 to create a system "image". You tin can so use this system paradigm to restore all software on your computer to the mode it was at the time yous created the system paradigm. To larn how you can create a system epitome, see Creating and Using a System Prototype to Restore Your Computer (Windows 8) .

rodgerssuid1988.blogspot.com

Source: https://support.hp.com/in-en/document/c03481733

Share this post